Wall design for the ranger

Discussion in 'Subwoofer Box and Custom Fabrication' started by liftedranger08, Feb 9, 2009.

  1. Kvo_8

    Kvo_8 Full Member

    its coming out really nice so far, good job
     
  2. liftedranger08

    liftedranger08 Full Member

    Thanks for the comments guys
     
  3. pedro quiroga

    pedro quiroga Well-Known Member

    wow that looks awesome. really nice cuts. cant wait ti see the finished product.
     
  4. liftedranger08

    liftedranger08 Full Member

    Well guys, i got some bad news. Apparently my dumb*** self cant measure. LOL When i measured, i didnt think of measuring the width of the top half of the inside of the truck. Well the box was 51" wide and when i put it in 2nite, it was way too wide, so i took it out, and cut it down to 49" wide. I was hoping to get it in tontie, but i will get it in tomorrow. The box was 7.5 cubic ft tuned to 39.6 Hz but now it is 7.1 cubic ft tuned to 40.3 Hz.
     
  5. pedro quiroga

    pedro quiroga Well-Known Member

    couldnt you just cut the corners?
     
  6. liftedranger08

    liftedranger08 Full Member

    No we thought about it, we had to take off around a 1" from each end. we figured it would have looked better if we just cut it.
     
  7. pedro quiroga

    pedro quiroga Well-Known Member

    oh ok............
     
  8. liftedranger08

    liftedranger08 Full Member

    Yea, i was really mad. But we did get it cut down tonite and i had to resylicone it thats why i couldnt put it in my truck tonite because i didnt want to smell sylicone all day. LOL
     
  9. pedro quiroga

    pedro quiroga Well-Known Member

    been there with bedliner spray. it stinks
     
  10. liftedranger08

    liftedranger08 Full Member

    Yea and i didnt really wana be high going into class tomorrow. So hopefully around 6 or 7 tomorrow, the 15s will be making noise.
     
  11. cccullen

    cccullen Full Member

    Well, it happens. Hope you get the box in soon. once it's in takes some pics and vids if possible.

    you guys think bedliner spray and silicone stink? try having your heater core go bad. That has to be THE worst!!! the smell is just now going away in my car, it smelled like dead fish in my car for a good 9 to 10 days!!! that was embarrassing.
     
  12. pedro quiroga

    pedro quiroga Well-Known Member

    MMMMMMMM fish:huh:
     
  13. pedro quiroga

    pedro quiroga Well-Known Member

    hell you think thats bad.

    a few years ago i hit a hitchhiker and forgot him in the trunk... man that was smelly i'll tell you what.

    after a few days.........
     
  14. liftedranger08

    liftedranger08 Full Member

    Yea that does have to suck. If it aint too dark tomorrow, i will get a vid. I really hope these subs pound in this box. What yall think?
     
  15. pedro quiroga

    pedro quiroga Well-Known Member

    no but seriously. once while camping i drove over some bear poop and it got on my muffler. hot muffler and bear poop dont play well.

    jeez talk about a smell that wont go away for a while.
     
  16. liftedranger08

    liftedranger08 Full Member

    I bet that stunk. LOL We had a battery go bad one time in our camper and it smelt way worse than rotten eggs. It was bad.
     
  17. cccullen

    cccullen Full Member

    burning bear poop? I don't want to even think what that would smell like. lol

    I hope my heater core never goes bad again.

    liftedranger, I'm sure that those subs will slam in your new box. There's only one way to find out though, git'r'done!
     
  18. liftedranger08

    liftedranger08 Full Member

    Yep ur rite, and tomorrow im going to git r done. :) Im so anxious to hear it.
     
  19. pedro quiroga

    pedro quiroga Well-Known Member

    yeah it was bad,and its not like i could have just hosed it off down the road.:p
     
  20. liftedranger08

    liftedranger08 Full Member

    Heres some pics of them in the truck.
    [​IMG]
    [​IMG]