/ Register

Suggestions for System in Classic Car

Discussion in 'General Car Audio Discussions' started by Mieser, Jun 21, 2010.

Page 3 of 3
  1. pedro quiroga

    pedro quiroga Well-Known Member

    hi for the speakers low for the sub. try 80 to 100 hi pass for the 6x9's and 80 low pass for the sub. you can over lap the freqs if the speakers can handle the frequencies.

    my mids are like this, 80 HP 80LP.
     
    pedro quiroga, Jul 6, 2010
    #41
  2. Mieser

    Mieser Full Member

    Guess I'm confused....the amp only has an "Off" or "Hi" selection for the crossover, there is no selection for "Lo". However, on the top of the amp there are frequency adjustment dials for both "AMP1" and "SUB". Am I correct in thinking that I will select the "Hi" option on the crossover switch and then adjust both frequency adjustments to your recommendation?
     
    Mieser, Jul 6, 2010
    #42
  3. Mieser

    Mieser Full Member


    Well, I got in the trunk tonight and I just don't have enough room to install boxes on the 6x9's. Will this be a problem and do you think they will over excurt with the pressure from the sub? Would installing a set of the foam speaker baffles help? It looks like they are pretty compact and I may have enough room to seal the 6x9's with them.
     
    Mieser, Jul 6, 2010
    #43
  4. jonnyv713

    jonnyv713 The Young Gun of CAT

    those will work
     
    jonnyv713, Jul 8, 2010
    #44
  5. pedro quiroga

    pedro quiroga Well-Known Member

    ok just adjust the dials on the crossover accordingly to each channel.

    are the dials numbered?
     
    pedro quiroga, Jul 8, 2010
    #45
  6. Mieser

    Mieser Full Member

    Yes, the dials are numbered.
     
    Mieser, Jul 8, 2010
    #46
Page 3 of 3