/ Register

Needing help with system for Golf Cart

Discussion in 'General Car Audio Discussions' started by Z400, Sep 5, 2009.

Page 3 of 4
  1. Lazy Eye

    Lazy Eye Full Member

    That's sweet man! I have been wanting to do something like that to my buggy/ go-kart but I take it mudding alot and it would be hard to find a spot to mount everything.
     
    Lazy Eye, Sep 24, 2009
    #41
  2. cccullen

    cccullen Full Member

    Looks great man. All ya gotta do now is maybe put some vinyl over the wood. Prolly take you literally 10 minutes to do. :) It's cheap and it'll look perdy.
     
    cccullen, Sep 24, 2009
    #42
  3. Z400

    Z400 Full Member

    Yup, Vinyl is in the plans. However, for right now i may just spray paint it black.
    Im really too excited about how well it turned out and am not too worried about how good it looks right now.
     
    Z400, Sep 24, 2009
    #43
  4. jonnyv713

    jonnyv713 The Young Gun of CAT

    looks really good!!!
     
    jonnyv713, Sep 24, 2009
    #44
  5. Z400

    Z400 Full Member

    Yeah its nice as **** for a utility cart/pit vehicle.

    I managed to slip a Tupperware container over the cd player which is effing perfect for protection.
    Im using mudflaps for semi trucks/trailers to keep any water spray from the tires and any flying rocks off the tires from hitting the speakers.

    Its shaping up real nice.
    I had to make a 30 min 1 way trip into town to take my dog to the er, while i was waiting on him i went to home depot and got some hardware to attach the rubber mud flaps to the cart.

    Ended up leaving with 2 halogen lamps for my race car trailer, a new air hose for the air compressor in my trailer as well as a 10 pack of T5 fluorescent bulbs and 3 new 48" shop lights for my garage.

    I'll be finishing the install tomorrow besides paint.
    I'll get some pictures up of the Tupperware and the mudflaps.
     
    Z400, Sep 25, 2009
    #45
  6. cccullen

    cccullen Full Member

    damn, you sound like me when i go to a hardware store. hahaha

    go in and plan to spend a couple bucks and you come out spending a fortune. lolz
     
    cccullen, Sep 25, 2009
    #46
  7. Z400

    Z400 Full Member

    Its all done, i never got around to taking any pictures of everything behind the front end.

    So the next pictures i post will be of it fully reassembled and ready for the pits.
     
    Z400, Sep 26, 2009
    #47
  8. Z400

    Z400 Full Member

    Z400, Sep 29, 2009
    #48
  9. cccullen

    cccullen Full Member

    sounds great!!!!!
     
    cccullen, Sep 29, 2009
    #49
  10. jonnyv713

    jonnyv713 The Young Gun of CAT

    that sounds great!
     
    jonnyv713, Sep 29, 2009
    #50
  11. Z400

    Z400 Full Member

    Thanks guys!
    It really does sound pretty damn good.
     
    Z400, Sep 29, 2009
    #51
  12. pedro quiroga

    pedro quiroga Well-Known Member

    thats sweet. i totally missed the pics from before. looks good.

    maybe instead of black paint some truck bed liner spray might work better
     
    pedro quiroga, Sep 30, 2009
    #52
  13. pedro quiroga

    pedro quiroga Well-Known Member

    you know i bet a small 6 inch bazooka tube under the seat would slam. or maybe a tactile transducer.

    and i love the ipod placement.
     
    pedro quiroga, Sep 30, 2009
    #53
  14. Z400

    Z400 Full Member

    Put on some paint today.

    [​IMG]
    [​IMG]
     
    Z400, Oct 12, 2009
    #54
  15. cccullen

    cccullen Full Member

    damn, that looks good!
     
    cccullen, Oct 13, 2009
    #55
  16. jonnyv713

    jonnyv713 The Young Gun of CAT

    very very very good!
     
    jonnyv713, Oct 13, 2009
    #56
  17. Z400

    Z400 Full Member

    Yeah, i did some work yesterday.

    Only thing i had planned on doing was installing a toggle switch for the accessory wire.
    So i drilled the hole for it on the left panel, went to insall the switch and the plywood was too thick for me to get a nut on the switch.

    So i ended up having to cut another piece of wood.
    So since i had to pull the drivers side panel apart, i went ahead and sprayed it.
    It looked great so i then tackled the right side as well.

    Looks 100% better now!
     
    Z400, Oct 13, 2009
    #57
  18. Kvo_8

    Kvo_8 Full Member

    i totally missed this thread a few months ago, but everything looks nice man. also watched the vid, those polks sound nice :) i nearly have the same set up in my car lol
     
    Kvo_8, Jan 26, 2010
    #58
  19. Z400

    Z400 Full Member

    Its time for a better amp


    Im getting static and distortion at low volume levels.


    I need a 2 channel amp, wanting something around 400-500 watts.
    My polk audio 5 1/4" components have a max wattage of 250w's and an RMS ratting of 10-100watts.

    So throw at me what you can find.
    Cheaper the better for me but want something that will sound decent.


    Right now im looking at a pyle marine 400w 2 channel amp.
    Open for suggestions though
     
    Z400, Apr 27, 2010
    #59
  20. jonnyv713

    jonnyv713 The Young Gun of CAT

    jonnyv713, Apr 27, 2010
    #60
Page 3 of 4