/ Register

Kicker 750.1 amp...what kind of subs/box?

Discussion in 'Subwoofer Box and Custom Fabrication' started by eazy, Oct 8, 2006.

Page 4 of 75
  1. eazy

    eazy Full Member

    Okay...well when I plug in the internal box volume, 4.96289 ft3, and plug in 30hz, it says a 16.5" tall, 2" wide, and 12.75" deep port will work...

    [​IMG]

    This is the most recent plan.
     
    Last edited: Oct 14, 2006
    eazy, Oct 14, 2006
    #61
  2. Rodny

    Rodny Full Member

    The port is 2 close 2 d back wall, need at least 4"
     
    Rodny, Oct 14, 2006
    #62
  3. aznboi3644

    aznboi3644 Full Member

    I'd go with a bigger port...but it will have to be longer...but making an L-turn won't be hard...I'd do subs side by side and port on left side....(this is facing the front of course)
     
    aznboi3644, Oct 14, 2006
    #63
  4. eazy

    eazy Full Member

    or I could tune it to 35hz and do this...

    [​IMG]
     
    eazy, Oct 14, 2006
    #64
  5. Rodny

    Rodny Full Member

    That's better :) Need braces some where.:D Slide1.JPG
     
    Rodny, Oct 14, 2006
    #65
  6. eazy

    eazy Full Member

    You don't think the port walls will be good enough to brace the box?

    If I do it your way Rodny, does it matter how long the braces are?
     
    eazy, Oct 14, 2006
    #66
  7. TheViking

    TheViking Well-Known Member

    WOW!!!!!!!!!!!!!! this topic has been going on WAY too long!!!!!!!!!!!!! LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


    J/K!!!!!!!!!! keeep asking questions, its cool thats what we are all here for!
     
    TheViking, Oct 14, 2006
    #67
  8. eazy

    eazy Full Member

    lol I want to this right the first time, and learn as much as I can doing it.

    Do those braces need to have holes cut into them for air to pass through?
     
    eazy, Oct 14, 2006
    #68
  9. Rodny

    Rodny Full Member

    1-I always brace my boxes, won't hurt.
    2-no bt make sure d subs will fit:D
     
    Rodny, Oct 14, 2006
    #69
  10. eazy

    eazy Full Member

    Do the braces need holes in them for air to pass through?
     
    eazy, Oct 14, 2006
    #70
  11. Rodny

    Rodny Full Member

    Rodny, Oct 14, 2006
    #71
  12. eazy

    eazy Full Member

    what is that box tuned to?
     
    Last edited: Oct 14, 2006
    eazy, Oct 14, 2006
    #72
  13. Rodny

    Rodny Full Member

    If you talking about d one on d Webb site is tune 2 36hz.
     
    Rodny, Oct 14, 2006
    #73
  14. eazy

    eazy Full Member

    How does 36hz sound?
     
    eazy, Oct 15, 2006
    #74
  15. pedro quiroga

    pedro quiroga Well-Known Member

    higher than 35 but lower than 37.LOL. should sound good.
     
    pedro quiroga, Oct 15, 2006
    #75
  16. eazy

    eazy Full Member

    newest plan...

    [​IMG]

    and the specs...

    Driver : Kicker cvr12 2ohm
    Number of drivers : 2
    Box type : Vented
    Box size : 4.963 ft^3
    Tuning frequency : 35.00 Hz
    Vent : 1 vent(s)
    7.57 in length for each
    16.50 x 2.00 in rectangle


    Relative
    Freq Gain SPL
    [Hz] [dB] [dB]
    20.00 -14.79 74.92
    25.00 -8.38 81.33
    30.00 -3.51 86.20
    35.00 0.36 90.07
    40.00 3.11 92.82
    45.00 4.45 94.16
    50.00 4.64 94.35
    55.00 4.28 93.99
    60.00 3.78 93.49
    65.00 3.30 93.01
    70.00 2.88 92.59
    75.00 2.52 92.23
    80.00 2.22 91.93
    85.00 1.96 91.67
    90.00 1.75 91.46
    95.00 1.57 91.28
    100.00 1.41 91.12
     
    Last edited: Oct 15, 2006
    eazy, Oct 15, 2006
    #76
  17. eazy

    eazy Full Member

    Is it bad that my sub box is taller than it is deep?
     
    eazy, Oct 15, 2006
    #77
  18. Rodny

    Rodny Full Member

    No, it doesn't matter if it is taller or deeper or wider, as long as the air space is correct.
     
    Rodny, Oct 15, 2006
    #78
  19. eazy

    eazy Full Member

    Okay, how does the newest one look?
     
    eazy, Oct 15, 2006
    #79
  20. Rodny

    Rodny Full Member

    Good..:) :D
     
    Rodny, Oct 15, 2006
    #80
Page 4 of 75