Separate names with a comma.
this is what you're gonna need to do the bypass. hope this helps. http://majortek.com/index.php?main_page=product_info&cPath=3_83&products_id=498...
I do that that non bose and bose systems in a avy have factory amps. the factory amp is located in or under the center consol this is all that i...
hardened metal doesn't always mean it would be a good ground. you want to go direct to the chasis or unibody not something connected to it. There...
SPL = sound pressure level. BIG BASS! For me, JL is way overpriced. there are a lot better subs out there.
First thing you gotta do is check the wiring of the subs. make sure all the connections are done properly. What kind of subs are they? how do you...
Ok, first off. you have to run the power and RCA's on opposite sides of the car. secondly, you will have to sand that ground point to bare metal....
I don't think the place where you grounded everything is a proper place. The goldish part that you mentioned isn't good. You should be finding a...
you have 3 10's now? what subs are they and what kind of box do you have them in?
a kenwood amp would work
I am assuming that you have a aftermarket deck. If you do have an aftermarket deck, are you positive that you also have an OEM amp? If so, you...
I do have 1/0 ga. from neg, to engine and neg to chasis, very good grounds in fact but I just want to do the negative alternator to chasis as well...
Damn electro, where you been hiding???? my engine took too long to cool down so i wasn't able to work on it tonight. So should i just make a new...
hmmm, pickings are slim for a amp that will give at least 300 watts @ 4ohms... Power acoustik is a decent brand, pretty solid... the first amp...
1 sub right? it would be giving 150/coil or 300 total. you should be looking for amp with a bit more power just so it will give you headroom for...
Bringing this thread back to life because i found out something. I may have misread or something but i wanted to mention it. I have done the big...
http://www.edesignaudio.com/product_info.php?cPath=1_21&products_id=30&osCsid=d40575311b24e49ff53ae6abda8e64f7
Welcome to CAT!
or if you'll only use two of the subs then you can only do so at a 2ohm load. If you have the space though and you don't want to add another amp...
here are the specs for your Hifonics amp: # RMS Power Rating: * 4 ohms: 325 watts x 1 chan. * 2 ohms: 500 watts x 1 chan. * 1...
Welcome Awrf... First of all, we have to know how your wired everything... 1. how do you have the power set up? is it fused near the battery? is...
