/ Register

which one to trust?

Discussion in 'Subwoofer Box and Custom Fabrication' started by mrmizcue, Sep 14, 2007.

Page 1 of 2
  1. mrmizcue

    mrmizcue Full Member

    The problem: I have WinIsd and BB6. I entered the same info into both programs and getting completely different out-comes.
    here is what i have:
    any suggestions?
     

    Attached Files:

    mrmizcue, Sep 14, 2007
    #1
  2. aznboi3644

    aznboi3644 Full Member

    your tuning in the BB program is 67Hz

    way too high
     
    aznboi3644, Sep 15, 2007
    #2
  3. mrmizcue

    mrmizcue Full Member

    i know it is too high...but if you look at win-isd it is 37...both ports are 10" long. i can get bb to tune at 37 but the port is half the size as in win-isd. i could understand 10-15% difference but not 50%. Can anyone help me with this? here are the speakers spec's:
     
    Last edited: Sep 15, 2007
    mrmizcue, Sep 15, 2007
    #3
  4. mrmizcue

    mrmizcue Full Member

    ok speaker specs:
     

    Attached Files:

    mrmizcue, Sep 15, 2007
    #4
  5. aznboi3644

    aznboi3644 Full Member

    WinISD does not account for port or driver displacement
     
    aznboi3644, Sep 15, 2007
    #5
  6. aznboi3644

    aznboi3644 Full Member

    On BBP how is your "total" volume 3.9??
     
    aznboi3644, Sep 15, 2007
    #6
  7. mrmizcue

    mrmizcue Full Member

    this is what the box will look like. in BB there is a interior hole of 1.229 ,.227 for subs, and .231 for port. Then i took the net volume and inserted it into Win-isd.
     

    Attached Files:

    • box.jpg
      box.jpg
      File size:
      15.8 KB
      Views:
      23
    mrmizcue, Sep 15, 2007
    #7
  8. electrolytic

    electrolytic Full Member

    You should get the box to peak at 40 hz like this, screw around with bassbox until your graph slides over.
     

    Attached Files:

    electrolytic, Sep 15, 2007
    #8
  9. mrmizcue

    mrmizcue Full Member

    so to answer my question...i should follow BB6? it is the more accurate program?
     
    mrmizcue, Sep 15, 2007
    #9
  10. electrolytic

    electrolytic Full Member

    yes, it's more up to date, winisd is old
     
    electrolytic, Sep 15, 2007
    #10
  11. mrmizcue

    mrmizcue Full Member

    this is what i got so far...it seems too peaky
     

    Attached Files:

    mrmizcue, Sep 15, 2007
    #11
  12. electrolytic

    electrolytic Full Member

    looks good to me, which subs are these and how many watts, if you add a little damping it will smoothen out the curve
     
    electrolytic, Sep 15, 2007
    #12
  13. mrmizcue

    mrmizcue Full Member

    RF P3 12d4 500 rms ...RF T10001bd rated at 1000 rms @ 1 ohm closer to 1480rms @ 1 ohm
     
    mrmizcue, Sep 15, 2007
    #13
  14. aznboi3644

    aznboi3644 Full Member

    F3 looks a bit high to me
     
    aznboi3644, Sep 16, 2007
    #14
  15. mrmizcue

    mrmizcue Full Member

    F3 is at 34.13
     
    mrmizcue, Sep 16, 2007
    #15
  16. jmenace_thakidd

    jmenace_thakidd Full Member

    wat program are you using to extract the pics of BBP6
     
    jmenace_thakidd, Sep 16, 2007
    #16
  17. mrmizcue

    mrmizcue Full Member

    there is only so much space i can use in my trunk. I have to leave enough space for a baby stroller and i am trying to leave the opening between the arm rest in the back seats for sound to enter the cabin. The amps (RF P8004 and P4004) will be mounted above the hole from the rear deck. The 2nd battery will go where the P4004 is now. Many things to go into a small space. If anyone has other ideas i am open for suggestions. Thanks
     

    Attached Files:

    Last edited: Sep 16, 2007
    mrmizcue, Sep 16, 2007
    #17
  18. mrmizcue

    mrmizcue Full Member

    screen print 32....look in your email
     
    mrmizcue, Sep 16, 2007
    #18
  19. electrolytic

    electrolytic Full Member

    Snagit Screen Capture
     
    electrolytic, Sep 16, 2007
    #19
  20. G3n3R@1

    G3n3R@1 Full Member

    u can also use shift+print screen and paste it into MSpaint and adjust the size from there.
     
    G3n3R@1, Sep 16, 2007
    #20
Page 1 of 2