Whatsup, I'm pretty new to car audio and have a few questions about what would be the best speaker enclosure for my subs. The system will be going in a 2000 chevy silverado single cab. I own: -2 12" Kicker Comps Impedance 4 ohms Sealed Box Volume (cubic feet) 1.25 - 3.5 Ported Box Volume (cubic feet) 1.75 - 2.25 Port diameter (inches) N/A Port length (inches) N/A Free-Air Yes Dual Voice Coil No Sensitivity 89.1dB Frequency Response 27 - 500 Hz RMS Power Range (Watts) 50-150 Peak Power Handling (Watts) 300 Top Mount Depth (inches) 5 13/16 Bottom Mount Depth (inches) N/A Vas (liters) 127.65 Fs (Hz) 26.5 Qts 0.427 Xmax (millimeters) 9.76 -Kicker ZX300.1 MONO D AMP I've currently got them hooked up to a zx300.1 amp in some junk single boxes and they barely hit. I found these two pre-fab boxes and I was wondering if anyone could tell me which one would give me the best spl without losing to much sq. Any feedback is greatly appreciated. First box: http://caraudiofactory.com/502x12-spl-sub-box-p-143.html Second Box: http://phoenix.craigslist.org/ele/689446645.html Specs for second box: Type: ported Profile: wedge Carpet: black Terminal: push post MDF Body: 5/8” - 15mm MDF Baffle: 5/8” - 15mm Volume (cu ft) - 2 Volume (liters) - 56.6 Tuning (hz) - 45
welcome to CAT. so they barley hit.?....can they possibly be wired with one out of phase to the other? the only prefab i've had luck with is probox.they are pricey tho. i got mine locally so it wasnt too much. http://www.proboxrocks.com/products/enclosures/unloaded/chevy/99CRC210/index.shtml
