Hello everyone. This is my first time here. I'm hoping somone can point me in the right direction. I have the above mentioned amp. I bought it new the first year it came out (early 90's I think). I had taken it out of the car it was in and honestly forgot about it until recently. I cannot find the DIN cord with all the RCA inputs. Anyone have any idea where I could find one? Any help is appreciated. Thanks.
http://www.the12volt.com/installbay/forum_posts.asp?TID=57726&get=last all i could find so far. "hi, looking at A/D/S AC201 adaptor cable (pinout shown on packaging). imagine it as a "U" with a "." in the middle. starting on the left and going CCW the pinout is....chnl 5, chnl 2, chnl 1, signal gnd, chnl 3, chnl 4, chnl 6. the center pin is turn-on/trgger. hopr this helps. mark" copied from that page.
oh and real nice old school amp BTW. good luck. i did read that some people were opening them up and hard wiring them too.
http://cgi.ebay.com/a-d-s-ads-power...14&_trkparms=72:1205|66:2|65:12|39:1|240:1318 wow. why not just sell it?
if you can't find what you need then i'd just sell it on ebay like pedro said. you'll probably get a good price for it and that will give you enough money to get a new amp.
Thanks everyone. I found a guy on eBay that sells a/d/s cords, but he's telling me that I need 2 cords in order for this to work, AC201 and AC203. I believe that when I bought it originally, it only came with 1 cord. The male DIN-RCA. I'm thinking that perhaps unloading it on eBay at a reduced price because of not having a cord might be the best idea. The problem there is I have no way of knowing if it works or not. I haven't used it in 10+ years. I have no reason to believe it wouldn't, but just to be sure, I'd like to test it first. I don't want to screw anyone.
