What subs should we use for 4th order BP? We want a LOW tune around 25Hz-30Hz. Plenty of airspace available, 2 20"x20" square ports. 2 18's. Run off either one or two AP30001Ds.
that was the orignial plan, solox 18s apx. 10 cu ft for the front (vented) chamber and apx. 20 cu ft for the rear (sealed) chamber. 2 10" ports.
Exodus Audio Maelstrom-X 18" 1) Speaker Parameters Diameter: 18.00 (inches) Qts: 0.37 Fs: 17.40 (Hz) Vas: 11.05 (cubic feet) = 312.90 (liters) S: 0.70 (response curve - .4 thru .7) -------------------------------------------------------------------------------- 2) 4th Order Bandpass Cabinet Parameters Lower 3db Rolloff: 20.00 Hz (F3 Provided by user) High 3db Rolloff: 53.89 Hz (Calculated) Sealed Box: 4.32 cubic feet = 7458.70 cubic inches = 122.24 liters Ported Box: 2.96 cubic feet = 5122.98 cubic inches = 83.96 liters Tuning Frequency: 32.83 Hz -------------------------------------------------------------------------------- 3a) If using a Single Port User definable port size: Port Diameter: 8.00 inches (203.20 mm) Port Length: 36.47 inches (926.43 mm) Suggested: (.3 X Speaker Diameter) Port Diameter: 5.40 inches (137.16 mm) Port Length: 15.33 inches (389.47 mm)