components in my Ranger

Discussion in 'Car Stereo Speakers' started by liftedranger08, Jul 26, 2009.

  1. liftedranger08

    liftedranger08 Full Member

  2. cccullen

    cccullen Full Member

    MB Quart isn't as good as they used to be...

    I've heard having 2 sets of components in the car without going active could cause some cancellation in the sound, at least that was what i was told...

    I'm waiting for my upgrade now, i upgraded to focal K2P's!!!

    If you want some killer midbass i've heard that the RE XXX components sound really good!
     
  3. liftedranger08

    liftedranger08 Full Member

    What do you mean by going active? Im not dead set on any brand so if yall have better brands, post them up.
     
  4. cccullen

    cccullen Full Member

    going active is what a lot of people do when they want it really loud and clear and even more so in SQ applications.

    In an active set up, you have a midbass, mid and a tweet in each door. They are not run through passive crossovers but connected directly to the amp/s and tuned from there.

    Here's a link on those RE XXX6.5'. Heard they have some nasty midbass...

    http://www.woofersetc.com/p4928/XXX...uot;-2-Way-2-Ohm-XXX-Series-Component-Set.htm

    they are 2ohm and are 150 watts RMS/side.
     
  5. liftedranger08

    liftedranger08 Full Member

    O ok. I understand now. Im new to highs and mids and stuff. Ive never done any in my truck. The REs look sweet. Im gona power them with a crossfire 404 4 channel amp. What about phoenix gold components?
     
  6. cccullen

    cccullen Full Member

    you mean the PG RSD's?

    They are great starter comps but for somebody that is looking for an upgrade I wouldn't suggest them.

    If you're like me, everytime you upgrade you want something A LOT better. the crappy thing is if you want something a lot better you will have to shell out $$$.

    I would rather invest in some really sweet used components then buy just "ok" new components. That's what i decided to do with the Focal K2P's. I would have never been able to afford them new but i found 2 sets really cheap... IMO you want to upgrade so you won't have to worry about getting anything else for a long period of time.
     
  7. liftedranger08

    liftedranger08 Full Member

    Yea i no all about upgradin. LOL I want something loud and clear. Im willing to fiberglass my door panels for extra speakers. Im really thinking about the REs. They look good and ive heard good things about them.
     
  8. cccullen

    cccullen Full Member

  9. cccullen

    cccullen Full Member

    Indeed they are very sexy speakers... I was looking for a used set but i couldn't come up with anything. lol Those RE's will get plenty loud and you can still install them in the stock location if you wanted to.

    You could still go with two pairs if you really wanted to. I know people that are doing that here but they only run them at the same time for outside listening and then when they are inside the car they turn them off (for staging purposes)
     
  10. liftedranger08

    liftedranger08 Full Member

    My amp does 200x2 bridged.Im thinking about selling it tho and getting something different.
     
  11. cccullen

    cccullen Full Member

    i'm sure those JBL's would be good with 200 watts going to them. What amp were you planning to get?

    I saw a NINe.2x for sale used but in like new condition for $100.. you may be interested... I was thinking of getting it but I don't know what i'd use it for. lol
     
  12. liftedranger08

    liftedranger08 Full Member

    Idk yet. Im getting a DC 2000d amp for my subs but idk if DC as a/b amps. If they do, im gona look into those. I think im hooked on the REs. So what do i need for each door?
     
  13. cccullen

    cccullen Full Member

    All i know is that the RE's are rated at 2ohms. so you're gona need an amp that's good for at least 150watts @ 2ohms per channel
     
  14. liftedranger08

    liftedranger08 Full Member

    My amp does 100x4 at 4ohms. I may end up getting the nine.2 so i can have all ED amps and not worry about getting a 2000d.
     
  15. cccullen

    cccullen Full Member

    that's an idea... you may be able to find a nine.2 used for cheap. check out the elemental designs forum...

    I did find that nine.2x but at 2ohms it puts out 300 watts.
     
  16. liftedranger08

    liftedranger08 Full Member

    O ok. I like the ED amps. So 6.5" and a tweeter in each door would be good?
     
  17. cccullen

    cccullen Full Member

    you should be okay with one set if you go with the RE's. Should be more than enough to keep up with your subs.

    now, if you plan on going in the 150+ db range then i would suggest going active. Then you'll be really loud and clear. but you'll need at least 2 amps for that. one 4 channel for mids and midbass then another amp for the tweets.
     
  18. liftedranger08

    liftedranger08 Full Member

    Ok, well i doubt i will be able to do 150s with the setup im going to do. Im gona do 2 dc lvl 12s in a 4.1 cubic ft box tuned to 33Hz. Its hard to explain how im gona do it, but i think it should look good when i get done. With 2 12s, one RE xxx component should be enough on a nine.2.
     
  19. cccullen

    cccullen Full Member

    more than enough. you should be VERY happy with the RE...
     
  20. liftedranger08

    liftedranger08 Full Member

    Thanks alot Cccullen. I was going to do a big system and go for the 155 db range, but when i get my pell grant for school back, im gona use that money to get me some 35x12.50 Nitto Mud grapplers with 20x9 Pro Comp 6001 rims for my ranger and just get a nice simple, but loud and good looking system.