Ok I Installed The Power Wire to the Amp Inserted the Speakers Into The Amp Inserted The Turn On Lead Into The AMp Grounded The Other Red Wire From A Bolt In the trunk To The AMp I'm Getting A Blue Light On My AMp But No Sound from speakers
Check your RCAS from the head unit to the amp to make sure they are plugged in. Also check and make sure the speaker wires are in the correct terminal. Positve with positive, and negative with negative. I hooked up my amp the other day and hooked a negative in the positive and it didnt work but atleast it was a simple fix.
Ok Theres My Problem >My Rca's...In My Factory Stocked Stereo It Has No Rca's Inputs...What Can I do About this
no rca's outputs? then you need a line out converter. stock head units dont have rca jacks in the back of them.
18$ at walmart. speaker wires go in one side and the rca's plug into the other side and they go to your amp/s
ok wait. does your amp have speaker inputs also? if it does then you dont need a line out converter. now if your amp only has rca inputs you do need the LOC. can you post your amps model and or a pic of the amp?
Pic of amo http://i47.photobucket.com/albums/f200/CraigMatthew/104_0281.jpg side pic of amp http://i47.photobucket.com/albums/f200/CraigMatthew Pic of the output converter i bought http://i47.photobucket.com/albums/f200/CraigMatthew/104_0284.jpg
so you have the wires from the radio going into the speaker level input of the amp and still no sound?
no i dont..i have a stocked radio. all i have is the remote turn on lead goin to the amp and the power wire,ground and the 12's speaker wires goin to the amp...i know i am Hard to explain to i've had so many people call me stupid but i jus dont know all this much and i have no money to get it installed professionally...but i dont know what wires to put into the level input..
i jus checked the amp and i seen the speaker inputs.it have 4 places for a wire...so all i do is get four wires then find the right speaker wires for the door speakers and run them back to the slots in my amp?
ok there is your prob. you dont have an input going to the amp. splice into the wires going to the rear speakers in your trunk and run them into the speaker level inputs of the amp.
ok sorry let me see if i am understanding this right ok i find the rear speakers wires .connect a wire to the both of them and run into the amp level imputs....but that is only 2 wires..do i need to do that to the front speakers to insert into the other two slots in the amp?
yea some times it really is hard to explain things by typing it. if your still having problems PM me your # i will call you and walk you threw it.
