/ Register

Kicker Solobarics L7

Discussion in 'Subwoofer Box and Custom Fabrication' started by t5munoz, Feb 9, 2008.

Page 3 of 3
  1. t5munoz

    t5munoz Full Member

    This will be a front slant enclosure with two sealed chambers for each pair of subs. The design would be 15"H x 55"W x 8"bottom depth x 5" top depth, 2.084^3ft gross vol. After all displacement, .89^3ft per chamber. I can also put a recessed amp rack in the center, it will be 15"W x 15.3"H, so you could mount the amps, and possibly the cap in there with them too. Built from 3/4" Perfecta UL-MDF. Seams matched and double sealed. Dado cut end caps. Reinforced baffle board. Seams fastened with Tite Bond glue and 1-5/8" counter sunk drywall screws. Walls fully braced and tied in with Maranti Hardwood bracing for zero wall flex and 100% cabinet integrity. 45 degree boards in the corners to kill standing sound waves and to add extra strength to the corner seams. High Quality, Gold plated binding post with nylon heads. Gray Muzicon carpet. (This is what I got from JD the guy who builds boxes. And with the amp I have Is a ppi 2150 i used it with my 12" L7s and i hit 144.7DB in a sealed box in my cavalier. So i know that it will move those subs
     
    t5munoz, Feb 12, 2008
    #41
  2. aznboi3644

    aznboi3644 Full Member

    I find it very hard to believe that two 12 inch L7s hit 144.7 in a sealed box. in a trunk car.

    Probably on a miscalibrated meter. No offense.
     
    aznboi3644, Feb 12, 2008
    #42
  3. electrolytic

    electrolytic Full Member

    strange, how big was the box? So you have two of these amps? You could run 300 watts to each L7 for 1200 watts. Is PPI underrated?

    PPI AM SERIES 2150 AMPLIFIER

    2 x 150 rms @ 4 ohm .02 % THD, 2 x 300 rms @ 2 ohms
     

    Attached Files:

    electrolytic, Feb 12, 2008
    #43
  4. pedro quiroga

    pedro quiroga Well-Known Member

    electro those amps back in the day were the $h!t.on par with your orion,my PG's,and hifonics of the day.

    i would chose those over what is being sold today!!

    i used to have my 10 in that truck box and it was nice and loud.so 4 8's is going to pound in that truck.
     
    pedro quiroga, Feb 12, 2008
    #44
  5. t5munoz

    t5munoz Full Member

    I have proof it was a usaci event and i have the plaq to prove it!!!
     
    t5munoz, Feb 12, 2008
    #45
  6. t5munoz

    t5munoz Full Member

    Electo they were the series after that the muffler series or gray series.
     
    t5munoz, Feb 12, 2008
    #46
  7. pedro quiroga

    pedro quiroga Well-Known Member

    sweet ass amps if you ask me!!

    did you ever check on craigs list?
     
    pedro quiroga, Feb 12, 2008
    #47
  8. G3n3R@1

    G3n3R@1 Full Member

    Last edited: Feb 12, 2008
    G3n3R@1, Feb 12, 2008
    #48
  9. electrolytic

    electrolytic Full Member

    ok cool, that's funny i always see them on ebay and just figured they were crap lol. So are they under rated? And can we run them at 2 ohms so each sub can get 300 watts rms, the S8L7s are 450 watts each.
     
    electrolytic, Feb 12, 2008
    #49
  10. t5munoz

    t5munoz Full Member

    The A600 is exactly rated like my pc 2150 they are real good amps i wish i could find the pc 2350 that would be great.
     
    t5munoz, Feb 12, 2008
    #50
  11. aznboi3644

    aznboi3644 Full Member

    its just hard to believe that two sealed L7s hit 144db

    Was that on a burp??
     
    aznboi3644, Feb 12, 2008
    #51
  12. t5munoz

    t5munoz Full Member

    Whats a burp, i don't know all i know is that i got second place lol!!!!
     
    t5munoz, Feb 12, 2008
    #52
  13. pedro quiroga

    pedro quiroga Well-Known Member

    a burp is a short bass blast at a freq that your box plays it loudest.

    darn whats the term....?.....resenant freq?someone help me here.

    mine is in the low 50hz range.i did a 136.6 with 350watts @ 2ohm mono.

    1 kicker solo 10.
    YouTube - Team JBL Presents the Festiva Burp
     
    pedro quiroga, Feb 13, 2008
    #53
Page 3 of 3